AudioRoundTable.com: Speaker » Question on wires between binding posts & cones

Home » Audio » Speaker » Question on wires between binding posts & cones

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Question on wires between binding posts & cones [message #15078]

Thu, 11 August 2005 09:46

hurdy_gurdyman
Messages: 416
Registered: May 2009

Illuminati (1st Degree)

Does anyone know of a commonly available wire that could be used as a replacement for the very flexible wire that goes between a driver's connectors and the cone?

Dave

Report message to a moderator

Don't be afraid [message #15085 is a reply to message #15078]

Thu, 11 August 2005 17:46

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

Shipping from Australia to the US is really quite cheap

Tinsel Lead

Report message to a moderator

Two more thoughts [message #15086 is a reply to message #15085]

Thu, 11 August 2005 17:56

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

1. Buy a PE close-out speaker and clip the leads
2. Get a length of mic cable and strip out the braided shield.

Report message to a moderator

Previous Topic:	latest project up and running
Next Topic:	Two New Line Array Kits

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 07:27:03 CST 2024