Sure enough, I checked and there they were. I bought two 16' lengths at 84 cents per foot, which the yard cut into eight foot boards for easier transport. So the boards are about 25% pricier than buying a 4' by 8' sheet, but it's worth the incremental cost even if you own a table saw. Many speakers, including the FredArray, can easily be adapted to an 11-1/4" width by 12-3/4" depth, permitting the use of these boards just as they are with no ripping. You can use a circular saw or even a jigsaw and a carpenter's square to cut them to the proper length. Speakerbuilding just became a lot easier for me; even more so for Linda!