AudioRoundTable.com: Source » Bypassing Output Stage?

Home » Audio » Source » Bypassing Output Stage?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Bypassing Output Stage? [message #14232 is a reply to message #14230]

Wed, 20 July 2005 15:09

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

That's what John Swenson does with his Toshiba 3950/60 mod. The signal path is tapped into just before the caps that connect the DAC to the filter / analog stage Op Amp. The improvement is phenomenal. The output is reduced by about 2 to 4dB, and the impedance is fairly high so you need to use an active preamp or integrated amp.

Swenson Mod

Report message to a moderator

[Message index]

		Bypassing Output Stage? By: GarMan on Mon, 18 July 2005 12:37
		Re: Bypassing Output Stage? By: FredT on Wed, 20 July 2005 15:09
		Re: Bypassing Output Stage? By: Manualblock on Tue, 02 August 2005 15:01
		Re: Bypassing Output Stage?/disregard above post By: Manualblock on Tue, 02 August 2005 15:05

Previous Topic:	Operetta's/Dominic
Next Topic:	CS508 Lift problems resolved...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 08 23:16:22 CDT 2024