|
|
| Re: What's the latest on power supplies? [message #14055 is a reply to message #14053] |
Thu, 18 December 2003 13:11   |
Wayne1
Messages: 4
Registered: May 2009
|
Esquire |
|
|
|
Jim, Look around in Mouser or Digikey for a good E-core transformer, 9-10 VAC at 5 amps or better. Stick it in a good steel case and use very good cable and connectors from the AC outlet and to the DI/O connectors. Make sure you've changed out the 5 volt regulator inside the DI/O. The stock one does not regulate well at all.
|
|
|
|
| Re: ART DI/O mods? [message #14056 is a reply to message #14054] |
Thu, 18 December 2003 13:12 |
Bill Martinelli
Messages: 677
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
|
The better the equipment the less the gain. It will give it a warmer sound and you might like it. Make sure the digital output on your CD is variable if your counting on that for attenuation. Bill
|
|
|
|
|
|
|
|
| Re: ART DI/O mods FAQ [message #14059 is a reply to message #14058] |
Fri, 19 December 2003 20:30 |
Wayne1
Messages: 4
Registered: May 2009
|
Esquire |
|
|
|
Bill, You are welcome. If you have any questions about any of the mods, drop me a line. I have modded several hundred and should be able to help you if you run into any problems. Happy Holidays! Wayne Waananen
|
|
|
|
| Re: ART DI/O mods? [message #14075 is a reply to message #14044] |
Sun, 08 February 2004 12:04 |
akhilesh
Messages: 1275
Registered: May 2009
|
Illuminati (3rd Degree) |
|
|
HI,
The tube part of this converter is only A to D. The D2A actually runs better without the tube, sicne there is less heat in the case.
Boulder cables does some good mods.
I have no idea how good the output stage is, but some people swear by the modded dac. I decided to go a different route (much older high end)
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
