AudioRoundTable.com: Source » turntable channel problems

Home » Audio » Source » turntable channel problems

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

turntable channel problems [message #12709]

Sun, 08 January 2006 18:10

ChristineS
Messages: 5
Registered: May 2009

Esquire

OK, after many months I've finally gotten some time to fix my turntable! Here's my problem: I have a Technics SL-BD22 with a audiotechnica AT91E cartridge. My turntable is hooked up to my technics amp, which has phono inputs. It's played well for 2 years, but recently the sound started sounding hollow and very faint. The pops and crackles from the turntable are, however, regular volume! I bought a new needle cartridge but no change. It's grounded OK.

However, when I removed the right RCA cable from the amp, the sound came through the left speaker at normal volume. Same happens when I unplug the left RCA cable, the sound then comes to the right speaker. Plug 'em both in and the sound is again very soft. Next step is to see if the cable is OK, but after chasing my 2-yr old around I"m too pooped tonite to look for one.
Thanks in advance for helping!

Report message to a moderator

Re: turntable channel problems [message #12710 is a reply to message #12709]

Sun, 08 January 2006 19:55

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Hi Christine; I remmember your original post. I think you have a bad capacitor in the phono stage but I may not be correct. Which Technics amp do you have?

Report message to a moderator

Re: turntable channel problems [message #12712 is a reply to message #12710]

Mon, 09 January 2006 08:31

ChristineS
Messages: 5
Registered: May 2009

Esquire

I have a Technics SA-EX320 amp.
Here's the link to my post from a year

ago..

http://www.audioroundtable.com/Turntable/messages/411.html

I was wondering if something went bad, since my setup worked fine for 2 years or so...

Thanks again!

Report message to a moderator

Re: turntable channel problems [message #12714 is a reply to message #12712]

Mon, 09 January 2006 09:56

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Christine; do you have a stereo/mono switch on the Amp? If so flip it back and forth while playing and see what happens.
Was that you that said you were moving across country at that time?

Report message to a moderator

Re: turntable channel problems [message #12715 is a reply to message #12714]

Mon, 09 January 2006 11:11

ChristineS
Messages: 5
Registered: May 2009

Esquire

No, unfortunately no mono/stereo button, but I just went and fiddled with the RCA cables going into the turntable, and now it actually works. Why I don't know, but it almost sounds like I have a faulty connection somewhere, probably the inputs in the turntable. Sound reasonable? I think I"ll listen to some music while it's still working, 'cause I don't know when it'll go on the fritz again!

Report message to a moderator

Re: turntable channel problems [message #12716 is a reply to message #12715]

Mon, 09 January 2006 13:09

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Thats why I asked; moving electronic equipment around sometimes loosens things up a bit. Putting the RCA jacks repeatedly into the amp probably made better contact.

Report message to a moderator

Previous Topic:	Which one to choose?
Next Topic:	Upgrading My Turntable?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 10:27:21 CST 2024