Home » Audio » Source » Turntable hum
Re: Turntable hum [message #12612 is a reply to message #12609] Thu, 17 November 2005 13:09 Go to previous messageGo to previous message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
Thats a pretty old unit. It sounds like you have bad RCA jacks. First: does the other inputs on the pre-amp work? The aux and Tape?
Next; have you tried the table through another amp? Next have you checked continuity from the ground lug on the RCA to ground on the chassis? If you have a multi-meter you can check easily. Tell us if you are up to troubleshooting this problem.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Help needed with a turntable purchase
Next Topic: Automatic Reject rejects too soon. Fisher MT-6630
Goto Forum:
  


Current Time: Sun Dec 22 17:54:30 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest