AudioRoundTable.com: Source » HELP with my Acoustic Research XA!

Home » Audio » Source » HELP with my Acoustic Research XA!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: HELP with my Acoustic Research XA! [message #12446 is a reply to message #12433]

Wed, 10 August 2005 16:40

hurdy_gurdyman
Messages: 416
Registered: May 2009

Illuminati (1st Degree)

Another place to check for wiring problems on the AR is where the wire runs between the top plate and the sprung subchassis. If the table was transported with the outer platter in place, the floating chassis will bounce around and chew through the wire. A complete tonearm rewiring is in order. Not hard, but requires patience. The AR-XA is worth the effort, IMHO.

Dave

Report message to a moderator

[Message index]

		HELP with my Acoustic Research XA! By: kevin on Mon, 08 August 2005 10:16
		Re: HELP with my Acoustic Research XA! By: Manualblock on Mon, 08 August 2005 11:27
		Re: HELP with my Acoustic Research XA! By: kevin on Mon, 08 August 2005 11:47
		Re: HELP with my Acoustic Research XA! By: Manualblock on Mon, 08 August 2005 12:50
		Re: HELP with my Acoustic Research XA! By: BillEpstein on Mon, 08 August 2005 16:06
		Re: HELP with my Acoustic Research XA! By: kevin on Tue, 09 August 2005 07:58
		Re: HELP with my Acoustic Research XA! By: hurdy_gurdyman on Wed, 10 August 2005 16:40
		Re: HELP with my Acoustic Research XA! By: Dominic on Thu, 11 August 2005 15:19

Previous Topic:	Ping Hurdy-Gurdy
Next Topic:	Grados,ortophons,shures and AR turntable hum

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Aug 12 09:14:36 CDT 2024