AudioRoundTable.com: Source » Direct Drive Revisited

Home » Audio » Source » Direct Drive Revisited

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Direct Drive Revisited [message #11673 is a reply to message #11672]

Tue, 20 July 2004 07:39

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Now you're talking. It sounds like you are describing the Platine Verdier, Which uses a magnetically suspended platter that is driven by a thin thread like belt. The platter is massive and must be push started after which the belt takes over. BTW, 20k tables while nice to see are not practical, 2k is more reasonable. The magnetic coupling of the DD motor, does that not impact the stylus through field effects? As implemented in all DD's I am aware of the ultra-light platters must ring like hell no? Thanks for giving this subject the respect it deserves. J.R.

Report message to a moderator

[Message index]

		Direct Drive Revisited By: jason on Sat, 17 July 2004 14:46
		Re: Direct Drive Revisited By: Wayne Parham on Sun, 18 July 2004 00:59
		Re: Direct Drive Revisited By: jason on Sun, 18 July 2004 19:57
		Re: Direct Drive Revisited By: Manualblock on Mon, 19 July 2004 13:33
		Re: Direct Drive Revisited By: Wayne Parham on Mon, 19 July 2004 16:59
		Re: Direct Drive Revisited By: Manualblock on Mon, 19 July 2004 17:45
		Re: Direct Drive Revisited By: Wayne Parham on Tue, 20 July 2004 00:15
		Re: Direct Drive Revisited By: Manualblock on Tue, 20 July 2004 07:39
		Re: Direct Drive Revisited By: Wayne Parham on Tue, 20 July 2004 11:44
		Re: Direct Drive Revisited By: jason on Thu, 22 July 2004 09:37
		Re: Direct Drive Revisited By: Manualblock on Fri, 23 July 2004 07:17
		Re: Direct Drive Revisited By: jason on Fri, 23 July 2004 08:04
		Re: Direct Drive Revisited By: Manualblock on Fri, 23 July 2004 09:58
		Re: Direct Drive Revisited By: jason on Sun, 25 July 2004 19:50
		Re: Direct Drive Revisited By: Manualblock on Sun, 25 July 2004 20:54
		Re: Direct Drive Revisited By: jason on Mon, 26 July 2004 05:35
		Re: Direct Drive Revisited By: Manualblock on Sun, 18 July 2004 08:49

Previous Topic:	AR Dust cover needed
Next Topic:	Alignment FAQ

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 00:45:23 CST 2024