AudioRoundTable.com: General » AC/DC Electronics

Home » Audio » General » AC/DC Electronics

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: AC/DC Electronics [message #1165 is a reply to message #1164]

Sat, 18 December 2004 06:42

Wayne Parham
Messages: 18795
Registered: January 2001

Illuminati (33rd Degree)

With an oscilloscope, set the input for DC coupling. You'll see an offset, and that reflects the DC level. If all you have is a DVM, you could use a 1Kohm resistor in series and a large capacitor after that in shunt to filter out the AC. The DC level is all that will remain, so just measure it with the DC voltage setting on your meter.

Report message to a moderator

[Message index]

		AC/DC Electronics By: Manualblock on Fri, 17 December 2004 17:08
		Re: AC/DC Electronics By: Wayne Parham on Sat, 18 December 2004 00:17
		Re: AC/DC Electronics By: Manualblock on Sat, 18 December 2004 02:44
		Re: AC/DC Electronics By: Wayne Parham on Sat, 18 December 2004 06:42
		Re: AC/DC Electronics By: Manualblock on Sat, 18 December 2004 07:59

Previous Topic:	P.C. Audio
Next Topic:	is this wayneparham.com?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 24 23:30:47 CST 2024