AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » 1st Scratch Build Done.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 1st Scratch Build Done. [message #11453 is a reply to message #11438]

Thu, 26 February 2009 00:25

Norbert
Messages: 42
Registered: May 2009

Baron

Shane,

I thoroughly enjoyed viewing your build. I recently build a 300B SET based on "Legacy" C3M penthode input stage. Couple of suggestions you may want to look into to improve the sound.
1] add ultrapath stage. The best source to find out more is from www.tubecad.com site
2] not sure if heard any arching from your power switch when turning it on/off,if that is the case consider adding 0.1uF@400V+ film cap across the switch
3] experiment with 2uF film cap across both cathode caps

Cheers,

Norbert

Report message to a moderator

[Message index]

		1st Scratch Build Done. By: Shane on Mon, 12 January 2009 15:49
		Re: 1st Scratch Build Done. By: Wayne Parham on Tue, 13 January 2009 14:24
		Re: 1st Scratch Build Done. By: Shane on Tue, 13 January 2009 15:39
		Nelson Amp By: Shane on Tue, 13 January 2009 16:06
		Re: Nelson Amp By: Wayne Parham on Tue, 13 January 2009 17:33
		Re: Nelson Amp By: Shane on Tue, 13 January 2009 17:57
		Re: Nelson Amp By: Wayne Parham on Wed, 14 January 2009 11:13
		Re: Nelson Amp By: Shane on Wed, 14 January 2009 15:33
		You've got mail! By: Wayne Parham on Wed, 14 January 2009 22:11
		Schematic updated. By: Shane on Tue, 13 January 2009 22:24
		Re: Schematic updated. By: Wayne Parham on Wed, 14 January 2009 11:10
		Re: Schematic updated. By: Shane on Thu, 15 January 2009 12:05
		Re: Schematic updated. By: Wayne Parham on Thu, 15 January 2009 13:15
		Re: 1st Scratch Build Done. By: SteveBrown on Wed, 04 February 2009 21:15
		Re: 1st Scratch Build Done. By: Shane on Thu, 12 February 2009 14:12
		Re: 1st Scratch Build Done. By: Norbert on Thu, 26 February 2009 00:25
		Re: 1st Scratch Build Done. By: Shane on Mon, 09 March 2009 01:05
		Re: 1st Scratch Build Done. By: Norbert on Mon, 09 March 2009 01:30
		Re: 1st Scratch Build Done. By: Shane on Wed, 11 March 2009 00:38

Previous Topic:	Darling amp done
Next Topic:	amp questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 02:36:22 CST 2024