AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » High Power Output SET

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

High Power Output SET [message #11024]

Sun, 27 February 2005 11:53

wunhuanglo
Messages: 912
Registered: May 2009

Illuminati (2nd Degree)

I wonder if anyone is experimenting with something like this?

A Real Man's Tube

Report message to a moderator

Re: High Power Output SET [message #11025 is a reply to message #11024]

Sun, 27 February 2005 14:58

Wayne Parham
Messages: 18756
Registered: January 2001

Illuminati (33rd Degree)

Coooool!

Report message to a moderator

Be a man - run PP (nt) [message #11026 is a reply to message #11024]

Sun, 27 February 2005 20:18

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

Report message to a moderator

Riiiight... [message #11027 is a reply to message #11024]

Sun, 27 February 2005 20:38

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

Let's see, Boeing has to tell PECO when they fire up their MW wind tunnel, I don't think you'll find many DIY running such things as that.

I have some DH Pentodes. 450W CCS anode rating. 120W g2 rating and a 10W g1. I am planning on a PP amp for ~300W output and still single-pair, Class A. No cooling fans needed. The glass is reated to 660 F.

they make an 833A look medium sized. The anode cap is 6SN7 sized. figure a PS for the PP amp to deliver 700 mA at 1k2Volts for the finals and drivers. G2 will be significantly lower, and run from its own supply.
regards,
Douglas

Report message to a moderator