Home » Audio » Thermionic Emissions » Homebrew amp schematics
Homebrew amp schematics [message #10849] Sun, 12 December 2004 06:58 Go to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18835
Registered: January 2001
Illuminati (33rd Degree)
Here are some schematics for SET amps using 45, 2A3 and 300B tubes:
Here's a push-pull 2A3 amp:

Report message to a moderator

Re: Homebrew amp schematics [message #10850 is a reply to message #10849] Sun, 12 December 2004 08:07 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
Bob Daneliek who designed the last 2a3 you named and that is his site also has a really easy and cheap SE pre-amp build write up using 5687 tubes. There are numerous links to his site from builders who have done that pre-amp and many claim it is a giant killer.

Report message to a moderator

Re: Homebrew amp schematics [message #10851 is a reply to message #10850] Sun, 12 December 2004 11:56 Go to previous messageGo to next message
Thermionic is currently offline  Thermionic
Messages: 208
Registered: May 2009
Master
I haven't seen the schematic you referred to, much less heard it. But, from my own personal piddling around with stuff, I can testify that 5687s sound killer! IMO, they are definitely better than the benchmark 6922.

Thermionic

Report message to a moderator

Re: Homebrew amp schematics [message #10852 is a reply to message #10850] Sun, 12 December 2004 14:55 Go to previous messageGo to next message
colinhester is currently offline  colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas
Illuminati (3rd Degree)
Got a link to the 5687 pre? Would this be a good first group project?....Colin

Report message to a moderator

Re: Homebrew amp schematics [message #10853 is a reply to message #10852] Sun, 12 December 2004 15:05 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
Well it is fairly easy schematic. The pre-amp transformer and the enclosure would be most of the cost. If you are interested then let me know.

Report message to a moderator

Re: Homebrew amp schematics [message #10854 is a reply to message #10853] Sun, 12 December 2004 15:23 Go to previous messageGo to next message
colinhester is currently offline  colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas
Illuminati (3rd Degree)
Yes, Please post link to the schematic!! As far as cost, let's just assume a fixed cost for enclosure - say, $5. This is low, but the circuit will work even if straped to a 2x4. The transformer is a diiferent concern, especially for tube-based projects.

Let me see the schematic and do a cost estimate on it. If you have time, please do the same, and we'll compare numbers. I was really hoping a tube preamp would be the first project; so, you can imagine I was excited to see your post. Preamps are pretty easy to build, and a circuit analysis should be straight forward (he says that now.)

Report message to a moderator

Re: Homebrew amp schematics [message #10855 is a reply to message #10854] Sun, 12 December 2004 18:17 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
The website originates from Bob's site; the last link in Wayne's post. The group of builders is the JELabs site. He also has a nice 2a3 SE amp that uses the cheapo Hammond output transformer. It sells for 30$. Don't tell anyone but I think buying Foreplay boxes is one idea. I think he gets 35$ for them. 5687 tubes are on sale at Angelas for 3$ ea. and the sockets go for 2.50$. The trans should be about 35$ the rest of the parts I guesstimate at 50$ Should put us at about 125$ Oh yeah 2.87$ for the 2x4. Check out JELabs and grab the circuit and let me know. No reason this can't be done with a minimum of fuss. Only thing is, on the JELabs site there are so many pics. it is almost too easy.

Report message to a moderator

Re: Homebrew amp schematics [message #10856 is a reply to message #10855] Mon, 13 December 2004 11:17 Go to previous messageGo to next message
colinhester is currently offline  colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas
Illuminati (3rd Degree)
Is this it?.....Colin

Report message to a moderator

Re: Homebrew amp schematics [message #10857 is a reply to message #10856] Mon, 13 December 2004 12:58 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
The site is DIYParadise.com. Once you get on there look for the 5687 based tube DIY pre-amp. You will see what I mean, they spell it out pretty thoroughly. Actually the 125$ price point; now that I look at it seems a little high. More like 80-90$. There aree many people who have built both the pre-amp and amp. The amp uses the same tube as an output tube and people build it SE or Push-Pull. On the site they compare it to a Foreplay.

Report message to a moderator

Re: Homebrew amp schematics [message #10858 is a reply to message #10857] Mon, 13 December 2004 14:00 Go to previous messageGo to previous message
colinhester is currently offline  colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas
Illuminati (3rd Degree)
Bingo. Looks like the perfect place to start!!!! We still need to let Wayne know what we're up to, if you have not already done so. When and where (forum?) do you want to do the first post?....Colin

Report message to a moderator

Previous Topic: A pentode on the input circuit...
Next Topic: who likes drawing composite curves?
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Feb 21 10:01:09 CST 2025

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest