AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » SET 45

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: SET 45 [message #10641 is a reply to message #10638]

Mon, 12 July 2004 17:43

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Hi AK; Heard the Korneff 45 a while ago and posted on the PI forumn. As I recall there was quite a bit of discussion concerning that amp at the time so you might want to check the archives. It worked very well with Altec's of exceptional efficiency. They seem to be going for reasonable prices now and I assume that is due to their ultra-low power output. I personally would be interested in your opinion of the amp and if at all possible the design and implementation of the circuit. May I ask is this purchase a result of your ongoing experiments with single driver systems? The 45 seemed to me at the time to be very sensitive to which speakers were used. Even amongst the more efficient speaks there was an obvious connection when they agreed with each other.(I mean the amp and speaks!)

Report message to a moderator

[Message index]

		SET 45 By: akhilesh on Sun, 11 July 2004 19:42
		Re: SET 45 By: Wayne Parham on Sun, 11 July 2004 21:57
		Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: akhilesh on Mon, 12 July 2004 06:17
		Re: Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: Manualblock on Tue, 13 July 2004 12:44
		Re: Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: akhilesh on Tue, 13 July 2004 13:28
		Re: Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: Manualblock on Tue, 13 July 2004 15:25
		Re: Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: Wayne Parham on Tue, 13 July 2004 17:29
		Re: Totally agree Wayne: it's the overall circuit that matters plus the parts. NT By: Vijay on Tue, 27 July 2004 16:55
		Re: SET 45 By: Manualblock on Mon, 12 July 2004 17:43
		Re: SET 45 By: akhilesh on Tue, 13 July 2004 08:16
		Commercial speakers that would work well with a 45 SEt By: akhilesh on Tue, 13 July 2004 08:21
		417A>45 SET in the works By: billfort on Thu, 15 July 2004 06:51
		Re: 417A>45 SET in the works By: akhilesh on Thu, 15 July 2004 09:11
		making a little progress on my 45... By: billfort on Tue, 27 July 2004 14:14
		Absolutely gorgeous! By: Wayne Parham on Tue, 27 July 2004 15:56
		Re: making a little progress on my 45... By: akhilesh on Tue, 27 July 2004 20:12
		Re: making a little progress on my 45... By: Bill Martinelli on Thu, 29 July 2004 21:33

Previous Topic:	Tube Pre-Amp Recommendation
Next Topic:	Metasonix TM-4

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 15:49:28 CST 2024