Rod Elliotts pre-amp [message #10220] |
Thu, 21 October 2004 10:44 ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
Manualblock
Messages: 4973 Registered: May 2009
|
Illuminati (13th Degree) |
|
|
Well; just for giggles I ordered Rods death of Zen pre-amp boards and they came today. Look nice. I am going to put them together with the chip amp el-supremo version and see what we get. Sure is easy building with these boards. At the same time I recieved the crossover boards. I have ordered Kaufman's tube xover and Rods. I am going to build both and compare using Wayne's suggested component values on the Theater 4's. J.R.
|
|
|
|
|
|
Re: Rod Elliotts pre-amp [message #10224 is a reply to message #10223] |
Sat, 23 October 2004 17:59 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
GarMan
Messages: 960 Registered: May 2009
|
Illuminati (2nd Degree) |
|
|
Ya, I was interested in doing a high powered KT88 amp project this winter, specifically the one in VTV19. A couple of things turned me off though. The first was sticker shock after I priced out the total cost of iron for the project. I'm all for getting the best sound possible, but cost-wise, that was out of my league. The second reason was that I finally realized that a tube amp was not the best solution for what I was looking for. The underlining reason why I was interested in a high power tube amp was because I was scouting out an all tube multi-amp system. But I finally accepted the fact that a used pro SS amp for the bass region (150Hz or less) would give the most bang for the buck. I can get a used 150Wx2 pro amp for about $300. Those chip amps are great little projects, but for me, they never turn out as cheap as planned. I always end up "upgrading" on parts and it's a real problem. Thanks for the link on the BEBE-T. I'll check it out this weekend. BTW, if you're looking for a small and inexpensive speaker project, you have to try the Studio-1. I love those little speakers! Gar.
|
|
|
|
|
|
Re: Rod Elliotts pre-amp [message #10228 is a reply to message #10227] |
Mon, 25 October 2004 13:02 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
GarMan
Messages: 960 Registered: May 2009
|
Illuminati (2nd Degree) |
|
|
Yes, I have checked out Par Metal. And thanks for the tip on component selection too. Let's just say I've been a little "non-progressive" about accepting the "Global Economy" nature of the Internet. I've pretty much been buying components from the three sources of partsconnexion.com, thetubestore.com, and digikey.ca simply because they ship out of Canada. The delivery charges have been extremely low, often delivered next day, and I have no surprises with unpredictable extra charges such as duty. And between the three of them, I've been able to find everything I need. My problem isn't the lack of low cost options, but convincing myself the lower cost components can sound just as good. Mind you, I've never used Jensen caps at $35 a pop or $6 Caddock resistors, but it would certainly help a lot if I can just settle for the Orange Drops for coupling instead of the AuriCaps. Gar.
|
|
|
Re: Rod Elliotts pre-amp [message #10229 is a reply to message #10228] |
Mon, 25 October 2004 14:50 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) |
Manualblock
Messages: 4973 Registered: May 2009
|
Illuminati (13th Degree) |
|
|
Yeah; it's funny but I find I must agree with you there. Loyalty seems to be underated these days. Maybe I am getting old but I used to walk around Edlies Electronics just for kicks. Somehow internet shopping just isn't the same. The only answer seems to be design with as few components as possible and make them the best you can manage. Nice filter links BTW.
|
|
|