AudioRoundTable.com: Thermionic Emissions » TUbe amps in the greatest shape

Home » Audio » Thermionic Emissions » TUbe amps in the greatest shape

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

TUbe amps in the greatest shape [message #10002]

Mon, 08 October 2007 16:03

Gilipsie
Messages: 77
Registered: May 2009

Viscount

How do I keep my tube amp in the best of shape, in good working condition? I sometimes turn my amp on before I plug it on, is that a good idea?

Report message to a moderator

Re: TUbe amps in the greatest shape [message #10003 is a reply to message #10002]

Sat, 13 October 2007 18:16

Wayne Parham
Messages: 18837
Registered: January 2001

Illuminati (33rd Degree)

Just use it from time to time, and always keep speakers connected when power is applied. Don't run a signal through them with the speaker outputs open. Keep them in a good environment free of large temperature changes, dust and debris.

Report message to a moderator

Re: TUbe amps in the greatest shape [message #10008 is a reply to message #10003]

Sat, 20 October 2007 09:32

Gilipsie
Messages: 77
Registered: May 2009

Viscount

What happens if I do run a signal through them with the speaker outputs open?

Report message to a moderator

Re: TUbe amps in the greatest shape [message #10009 is a reply to message #10008]

Sat, 20 October 2007 10:01

Wayne Parham
Messages: 18837
Registered: January 2001

Illuminati (33rd Degree)

The voltage across the plate rises very high. It can exceed the maximum plate voltage rating in some cases. Certainly don't apply a signal to the preamp inputs with gain turned up if there is no load.

Report message to a moderator

Previous Topic:	Pleasantly Surprised
Next Topic:	fender 12At7

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Mar 01 05:00:32 CST 2025