| |
499 Search Results Found |
| 1 |
Forum: Pi Speakers «»
Posted on: Sun, 09 July 2023 10:01 «»
By: Wayne Parham
Re: 4-pi "clone", active - am I on the right track?
Those look cool!
Here are some things to consider, test and check:
Phase angles, crossovers and baffle spacing
Baffle spacing, phase angles and time alignment, revisited
Crossover optimization for DI-matched two-way speakers
Cabinet design, port p...
|
| 2 |
Forum: Pi Speakers «»
Posted on: Sat, 08 July 2023 16:46 «»
By: mathiasb
4-pi "clone", active - am I on the right track?
Hello,
I built a set of four Pi "clones", similar build but a tad smaller and no horizontal offset for the tweeter. I am trying to understand / learn along this process so my current crossover is probably far from ideal. I am using a MiniDSP d...
|
| 3 |
Forum: Pi Speakers «»
Posted on: Mon, 03 April 2023 02:13 «»
By: hazmoment
Am I in the Right Place?
Hi. So I have recently built a pair of Dual Planar Front Horns which I purchased plans for from Joseph Crowe and CNC machined from Baltic Birch Plywood. They look fantastic and I'm very pleased. However, I am now looking to complete the project by building...
|
| 4 |
Forum: Pi Speakers «»
Posted on: Tue, 14 September 2021 04:15 «»
By: Roger S.
Re: 4pi build with stands finally realized
Horn mounting. Tight fit, and flush. Made two extra holes on the sides of the horn just to be sure. The horn itself is damped too.
Filter install. Just enough place for the filter. Speakon 4 pole installed on bottom. I modified the filter for bi-amping ...
|
| 5 |
Forum: Speaker «»
Posted on: Tue, 17 November 2020 11:25 «»
By: Wayne Parham
Re: Futzing with vibration control
There are definitely differences between amps, and one of the things to watch for is low-level behavior. Amps that are designed to run higher-power levels sometimes aren't as clean at very low power levels. That's what the headphone amp guys watch out ...
|
| 6 |
Forum: Pi Speakers «»
Posted on: Fri, 20 December 2019 00:23 «»
By: Symphonimind
Re: Definimax 4012HO - End of Life
Dear Wayne, currently I have a pair of 3012HO. I have looked at frequency response, T/S params and everything else, the 3012HO and Delta Pro 12A are almost exactly the same. They are too similar to each other.
Could I just put it to use with PSD20...
|
| 7 |
Forum: Pi Speakers «»
Posted on: Mon, 09 December 2019 10:47 «»
By: Wayne Parham
Re: 4PI Plans Request
You've got mail!
I agree with Barry about the JBL 2226H. It is an excellent midwoofer. The flux stabilization ring in the motor structure reduces distortion down to the levels normally only seen in horns. When combined with a horn tweeter, you have...
|
| 8 |
Forum: Pi Speakers «»
Posted on: Mon, 09 December 2019 09:42 «»
By: mathiasb
Re: 4PI Plans Request
Thank you for your reply! I currently have the HTM-10's myself, but have only had them for less than a year, and paired with a subwoofer all this time. I haven't given them the chance to see "what they can do".
My plan for the JBL's was to...
|
| 9 |
Forum: LSAF «»
Posted on: Thu, 10 January 2019 20:50 «»
By: gofar99
Re: LSAF 2019
Hi Wayne, Maybe....if we can get some chassis made. Lack of them has severely hurt our ability to do business. Rodney had to move everything as well to a new location and now everything is in boxes. That must be a vintage photo as the preamp and amps a...
|
| 10 |
Forum: Pi Speakers «»
Posted on: Fri, 30 November 2018 10:47 «»
By: vandevoordekoen
Re: Amp for 4pi speakers
Nice to read that I (and the room) did things right there.
I guess my expectations were wrong here. Should have read your paper better.
Can I get good EQ with 200$ budget for EQ? If so, any advise?
Any thoughts about MiniDSP 2x4?
...
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
