Audio advice and discussions with audiophiles and professionals. Free discussion forums, open to all and frequented by industry experts. Ask questions and get advice on stereos, speakers, hi-end amplifiers, pre-amps, home theater, tube hi-fi, turntables, vinyl, tweaks, music, films, video, DVDs and more.
up to about 500w rms using a passive crossover whether it is,2 way, 3way,bandpass,highpass,lowpass,1st order,2nd order,3 rd order,4th order it is cheaper for up to 500w rms. But when it is over 500w ,use an active crossover which is cheaper than the passive crossover at 500w and above. Also the active crossover is better than the passive crossover,cos you can adjust the roll off point,and limit the frequencies. So for example a 50hz-5 khz driver can be limited to 50hz,so 50hz and below doesn't damage the driver,also at this point you can crossover to a sub bass bin - 20hz or so