AudioRoundTable.com - RDF feed
type: channel
description: Audio advice and discussions with audiophiles and professionals. Free discussion forums, open to all and frequented by industry experts. Ask questions and get advice on stereos, speakers, hi-end amplifiers, pre-amps, home theater, tube hi-fi, turntables, vinyl, tweaks, music, films, video, DVDs and more.
items: alternating line array
items: Re: alternating line array

alternating line array
type: item
description: I have a bunch of BG neo8's I'd like to use in a line array. I was hoping to use them in a straight horn configuration (20" sides) so I can push the crossover point close to 500Hz (reports on diyaudio have them going down to 200Hz in this configuration, but that's their resonant frequency). The woofs would only need to get down to 100Hz or so. The horn configuration isn't really workable with the traditional line of woofers beside the neos. So I was thinking about alternating some small drivers with the planars. Given the lack of vertical dispersion of the neo8's and the low crossover point I thought this might escape lobbing issues, but I'd like some opinions before investing in an experiment. Thanks.
creator: Angaria
date: 2007-05-03T01:26:22-00:00

Re: alternating line array
type: item
description: I'm not sure what you are talking about. Can you give us a picture of what you mean? You might also post this on the PE forum which has lots more traffic than the array forum. Marlboro http://pub48.bravenet.com/photocenter/album.php?usernum=4095425731&album=48032
creator: Marlboro
date: 2007-05-03T13:17:43-00:00

Re: alternating line array
type: item
description: Okay, will try that. What I'm considering is a vertical mid-ribbon-mid-ribbon-mid-ribbon etc setup. The neo8's are about 8" high each. The "mids" would be the smallest possible driver that would go down to 120 or so Hz.
creator: Angaria
date: 2007-05-03T13:50:17-00:00

Re: alternating line array
type: item
description: >>alternating line array Not a good idea. >>BG Neo8 Check the response chart, doesn't look good on the top end. Neo8 would make a nice midrange driver and add a 'super tweeter' array. Then you have to make a midbass array. You might be better off selling those Neo8's and making a leaner and better design, true ribbon + midwoofer, 2 way line array. Simple. But since you have the neo8 drivers, just make a test baffle using cheap wood and see if those drivers setup yield satisfaction before investing more money in the project.
date: 2007-05-03T16:13:33-00:00

Re: alternating line array
type: item
description: thanks - should have mentioned I have a tweeter I'll use from 7K up.
creator: Angaria
date: 2007-05-03T17:18:21-00:00