AudioRoundTable.com - RDF feed
type: channel
description: Audio advice and discussions with audiophiles and professionals. Free discussion forums, open to all and frequented by industry experts. Ask questions and get advice on stereos, speakers, hi-end amplifiers, pre-amps, home theater, tube hi-fi, turntables, vinyl, tweaks, music, films, video, DVDs and more.
items: Dynauido crosover design
items: Re: Dynauido crosover design

Dynauido crosover design
type: item
description: I plan on building a two way speaker using dynauido drivers, D28/2 tweeter and 17W75 8 ohm(not the 17W75XL 4 ohm). The enclosure will be sealed with a volume of19 to 28l. Does anyone know where I can get a good crosover design for this configuration. Thanks Gary
creator: Garrett Roach
date: 2006-11-04T03:40:35-00:00

Re: Dynauido crosover design
type: item
description: Dear Garrett, I did design a cross over for that combination back in 1984, and yes, even back then it was a computer assisted design. My speakers which are still in use, are actually two and a half ways, as they are diffraction compensated. I can easily adapt the design to a straight two way. I used these speakers on location, mainly for outside concert broadcast work. The musicians I worked with always held them in high regard. If you are interested contact me Regards, Mark.
creator: Dr Mark Carter
date: 2006-12-19T15:42:24-00:00

Re: Dynauido crosover design
type: item
description: Dear Mark Thanks for your reply. I was able to get the crossover for Madisounds MDY-4. The MDY-4 used the 17W75EXT and they were kind enough to modify the crossover to acomidate the standard 17W75 driver. I obtained the plans to build the cabinet from a fellow I met from another posting. The MDY-4's are a .5 cuft. enclosure with a Scan Speek Aperiodic vent. I finished them in red oak vineer and Poly high gloss finish. The finished speakers sound excelent.
creator: Garrett Roach
date: 2006-12-19T20:53:46-00:00