AudioRoundTable.com - RDF feed
type: channel
description: Audio advice and discussions with audiophiles and professionals. Free discussion forums, open to all and frequented by industry experts. Ask questions and get advice on stereos, speakers, hi-end amplifiers, pre-amps, home theater, tube hi-fi, turntables, vinyl, tweaks, music, films, video, DVDs and more.
items: DIY JBL 2226H + DE250 Based Speaker
items: Re: DIY JBL 2226H + DE250 Based Speaker

DIY JBL 2226H + DE250 Based Speaker
type: item
description: I have a pair of JBL 2226H at home along with a pair of B&C DE250. I also have plenty of crossover parts on hand. The only thing I need to make a 4pi speakers is the waveguide. BUT - I already have a pair of 4Pi speakers and wanted to experiment with something different. I have a pair of QSC HPR152i clones. They are 14"x10" horns. Any thoughts of whether I can make this combination work? I don't want to start making sawdust if there some obvious signs that it can't work. Specifically, I am concerned about center-to-center distance between the CD+Horn and the Woofer. I've read before that the CtC distance should not exceed the crossover frequency. I'm curious about what the crossover frequency is for the 4pi speakers. The closest I can get the center to center distance is possible...possibly...12 inches, and that's with overlapping the horn and rear mounting the woofer. Doable? Thoughts?
creator: dkalsi
date: 2020-04-29T16:21:42-00:00

Re: DIY JBL 2226H + DE250 Based Speaker
type: item
description: Seems like the Econowave folks did that combination for a while. If memory serves, it was very nice. It would naturally have a narrower forward lobe in the vertical dimension, as you've rightly inferred from the horn height and requisite driver spacing. My suggestion is to build it! Do an A/B comparison, both listening and measuring!
creator: Wayne Parham
date: 2020-04-29T22:05:06-00:00