Posted by DanR. [ 65.27.238.228 ] on March 02, 2005 at 08:12:57:

In Reply to: Turntable thrust bearing (replacement) alternative posted by DanR on November 12, 2004 at 08:04:30:

Original Message -----
From: "DanR"
To:
Sent: Thursday, February 10, 2005 8:14 AM
Subject: Re: Turntable thrust bearing (replacement) alternative

> Dale;
>
> I am really happy that the solution worked and appreciate knowing that you
> have succeeded in getting the TT up and running properly.
>
> I, too, had the loss-of-bearing problem for many years and finally decided
to
> take action.
>
> It's interesting to note the the Lab-80 was the first TT (at least from
> Garrard) that used the slick-plastic Delrin in a trip-mechanism. It was
used
> because it is light-weight and a low-friction material that would allow
the
> trip action to work with minimal drag on the unit.
>
> It was to your good fortune that you had access to the punch set. Cutting
> the washers out using the X-acto knife was not fun.
>
> Let me know from time to time how the fix is working -- it should perform
> well for many years ...
>
> Regards,
>
> DanR.
>
>

Replies: