What about volume pot impedance?

[ Tubes Forum ] [ Help ]

Posted by Bill Epstein [ 75.143.208.132 ] on July 25, 2008 at 08:50:39:

Both my sources have output impedii (?) of less than 1000 ohms. I just received a 10k PEC pot to try in place of the 100k in my passive.

Seems like 100k is a de facto standard for pre-amps pots and attenuators. If most of these have output impedances below 1000 ohms and the favorable ratio is 1:10, why is this?


Replies:



[ Tubes Forum ] [ Help ]