Posted by Damir [ 213.202.114.69 ] on April 24, 2006 at 08:36:22:
In Reply to: Re: DeVille 212 amp trouble. posted by James on April 23, 2006 at 17:28:21:
If all those voltages are OK, then chances are that you`ve just had the bad tube. Try another good tubes, but look to the plates - if they turn red, switch it off immediately!
(The proper metod, of course, would be monitoring cathode current through small R=10 Ohms between cathode and the ground - 30...40mA of standing current.)
[ Tubes Forum ] [ Help ]