Posted by 2wo [ 70.110.234.218 ] on December 02, 2005 at 21:55:11:
In Reply to: Re: On the other hand... posted by Tickfawriver on November 29, 2005 at 16:17:42:
Well, OK then. Go with the 6L6.
The fact that they felt the need to run 2! 5U4’s , leads me to believe that the PS can supply > 200ma of b+
The only question is how much filament power is available. The filament string shown, will draw a bit less then 3A, but it continues off to power SK2-Sk3. So there is as a guess at least 1A more to be had.
I think it’s doable, with a little caution.
Before you start , try running the stage mono full range to get a feel for the output transformer. Lift the .022 cap from the 15K resistor and feed your signal there…John
[ Tubes Forum ] [ Help ]