Posted by Wayne Parham [ 65.69.120.224 ] on May 31, 2005 at 12:07:25:
In Reply to: Parallel Notch Filter Question posted by FredT on May 31, 2005 at 10:15:03:
The filter is dependant on source impedance and load, and it should have a voltage dividing component too. If you have a different source or load, you'll need different values. If the circuit has very high impedance, the filter would act as a short at all frequencies. If very low impedance, the filter would act as if it weren't there.
[ Speaker Forum ] [ Help ]