Posted by hurdy_gurdyman [ 4.229.195.108 ] on June 03, 2004 at 11:39:19:

In Reply to: Looking for T/S specs for EV LS-8 posted by hurdy_gurdyman on June 02, 2004 at 10:27:05:

Found them, thanks to elcraigo over on the Fullrange Driver Forum.
Dave

>elcraigo

Re: Need T/S parameters for EV LS-8

T/S for (2) LS8 I measured:
EV - LS8 Sample #1
"Fs = 76.000 Hz"
"Zmax = 15.825 ohms"
"Re = 5.600 ohms"
"Zdb3 = 10.954"
"F1 = 59.781 Hz"
"F2 = 95.587 Hz"
"Qms = 4.152"
"Qes = 1.469"
"Qts = 1.085"
"Le = 0.1970 mH"
"FsA = 48.000 Hz"
"Sd = 248.286 sq.cm"
"Cms = 0.3304 mm/N"
"Mms = 0.01327 kg"
"BL = 4.915 Tm"
"n0 = 0.82976 %"
"Vas = 28.807 liters"
"SPL = 91.208 dBSPL 1W/1M"

EV - LS8 Sample #2
"Fs = 80.000 Hz"
"Zmax = 10.756 ohms"
"Re = 4.780 ohms"
"Zdb3 = 8.617"
"F1 = 63.473 Hz"
"F2 = 100.614 Hz"
"Qms = 3.883"
"Qes = 1.726"
"Qts = 1.195"
"Le = 0.1565 mH"
"FsA = 48.000 Hz"
"Sd = 248.286 sq.cm"
"Cms = 0.3518 mm/N"
"Mms = 0.01125 kg"
"BL = 3.958 Tm"
"n0 = 0.87721 %"
"Vas = 30.671 liters"
"SPL = 91.449 dBSPL 1W/1M"

some elcraigo T/S <

Replies:

• Cabnet suggestions? - hurdy_gurdyman 13:25:47 06/05/04 (0)