Posted by robertG [ 67.68.242.63 ] on January 12, 2005 at 11:12:26:
In Reply to: Re: fostex rear loaded horn design posted by DanTheMan on December 17, 2004 at 23:30:07:
Most (all?) designs call for a simple cap, 6 dB/octave. With 2 or 3 caps, you can experience different Xover freq. Since the T90A is more sensitive than the 206 (or any other Fostex FR), you can cross it all the way up.
For example, if crossed at 20KHz, you will still have a -6dB output at 10KHz (wich would be OK, given the difference in sensitivity). The idea of crossing the supertweeter very very high is bypass any need for a resistor in the circuit.
You will also notice that those BLH with super tweeters ar the larger one (8 inches and up), so if you have a smaller room, you might just go for a 6.5in. and do without the ($$$) tweeter.
[ SingleDriverSpeakers Forum ] [ Help ]