Posted by akhilesh [ 129.244.120.97 ] on October 20, 2005 at 08:31:51:

I saw this at parts express:
Part Number 290-434
Sells for around $350 each. (Already has a heatsink in the front of the cone, I think).
It's an 18 incher with 97 db eff that can do 1250 watts rms.
Xmax: 9.8 mm.
Wonder what would happen with 2 of these and a suitably modified
12 pi cabinet. Should get 135 db SPL continuous you think?
-akhilesh

Replies:

• Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Bill Wassilak 09:38:22 10/20/05 (10)
  • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - akhilesh 09:59:20 10/20/05 (9)
    • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Bill Wassilak 10:24:52 10/20/05 (8)
      • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - akhilesh 11:52:42 10/20/05 (6)
        • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Bill Wassilak 14:41:25 10/20/05 (4)
          • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - akhilesh 10:41:04 10/21/05 (3)
            • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Bill Wassilak 10:45:16 10/21/05 (2)
              • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - akhilesh 13:42:29 10/22/05 (0)
              • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Wayne Parham 12:40:46 10/21/05 (0)
        • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Wayne Parham 13:31:15 10/20/05 (0)
      • Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Wayne Parham 10:38:47 10/20/05 (0)
• Re: Eminence driver that can handle 1250 wattts RMS, with heat sink - Wayne Parham 09:15:51 10/20/05 (0)