Re: Driver Escalation

In Reply to: Driver Escalation posted by DRCope on October 23, 2002 at 13:22:38:

I've still have the TAD 1602 drivers, so if you want them, E-mail me and we'll make arrangements. PiAlign recommends a 3.85 ft³ motor chamber tuned to 37.5Hz with a 4.65" dia. x 4.4" long port, or a rectangular port that's 3.1" x 5.5" height and width and 4.4" long. They're perfect for a three-way cornerhorn, like the ones I've made with a 2123 midrange driver.

Follow Ups:

3 Way It Is! - DRCope 09:53:24 10/26/02 (0)
Re: Driver Escalation - DRCope 08:01:33 10/25/02 (7)
- Re: Driver Escalation - Wayne Parham 12:41:40 10/25/02 (4)
  - Re: Driver Escalation - DRCope 13:48:55 10/25/02 (3)
    - Three-way systems - Wayne Parham 15:01:02 10/25/02 (2)
      - Any progress on the active cross-over mentioned a while back? nt - Garland 15:34:09 10/25/02 (1)
        
        Re: Any progress on the active cross-over mentioned a while back? - Wayne Parham 16:55:54 10/25/02 (0)
- Trouble, trouble - JLapaire 12:14:42 10/25/02 (1)
  - Re: Trouble, trouble - DRCope 13:08:05 10/25/02 (0)
Cabinet considerations for TAD 1602's - DRCope 09:33:08 10/24/02 (3)
- Re: Cabinet considerations for TAD 1602's - Wayne Parham 12:12:41 10/24/02 (2)
  - Re: Cab & xover considerations - DRCope 13:03:39 10/24/02 (1)
    - You've got mail! - Wayne Parham 15:08:56 10/24/02 (0)
PSD2002 - Luxmanlover 16:14:38 10/23/02 (3)
- Re: PSD2002 - Wayne Parham 17:04:15 10/23/02 (2)
  - Re: PSD2002 - DRCope 17:34:05 10/23/02 (1)
    - Re: PSD2002 - Wayne Parham 17:55:06 10/23/02 (0)
Re: Driver Escalation - DRCope 14:26:37 10/23/02 (1)
- Re: Driver Escalation - Wayne Parham 14:30:29 10/23/02 (0)