Posted by Erik Johansson on July 15, 2002 at 11:04:14

In Reply to: Tolerance posted by Wayne Parham on July 14, 2002 at 15:38:56:

Here is a picture of the ports I will be using. As you can see it's outer edge will extend about 2.5mm from the baffle (if I don't recess it which I don't have the tools to do) due to the flange with the screw holes. From where do I measure the length of the port? From where it starts (2.5mm out from the front baffle) or from the outside of the baffle?

/Erik

• Re: Tolerance - Till E. 20:36:00 07/15/02 (0)
• Re: Tolerance - Wayne Parham 11:56:07 07/15/02 (1)
  • Re: Tolerance - Erik Johansson 12:15:38 07/15/02 (0)