Re: Alpha 10 modeling

[ PiSpeakers Forum ] [ Help ]

Posted by Wayne Parham [ 64.149.48.129 ] on April 17, 2009 at 17:37:53:

In Reply to: Alpha 10 modeling posted by solomty on April 17, 2009 at 17:09:16:


In the tower two π loudspeaker, f3 is about 40Hz and f10 is about 30Hz. You can safely run the full 100 watts throughout the passband.

You could use the Alpha 10 in a larger box with an EBS alignment to get deeper extension. But excursion will limit your bass output in a large box, so be sure to limit the power below 100Hz. Excursion will become excessive in a 10ft3 cabinet at about half the power of a 5ft3 box.



Replies:



[ PiSpeakers Forum ] [ Help ]