Posted by Matts [ 66.167.51.237 ] on March 19, 2009 at 22:40:25:

In Reply to: Re: cardboard port for 4Pi? posted by reguax on March 19, 2009 at 17:34:33:

when I made mine I got some lighter baltic birch plywood made for models at Michael's, I guess about 1/4" or maybe 3/8" and used that for the port. It was real easy to work with and I used masking tape to hold it together while the glue dried. Just butt joints, as Wayne said. I spray painted the inside of it flat black before gluing it on the back of the baffle, also gave the cutout on the baffle a touch of flat black on the inside edge.

Replies: