Posted by Wayne Parham [ 76.211.67.64 ] on July 24, 2008 at 12:55:05:
In Reply to: Lab 12 cabinet design posted by Paul W on July 24, 2008 at 08:21:27:
I'll send plans. As for the connection, you could wire them in parallel with a large coil in series with the sub, but you'll need to use an amp with the capability of driving a low impedance load. It will dip as low as 3Ω if you wire it in parallel like this, so be sure your amp is OK with that.
[ PiSpeakers Forum ] [ Help ]