Posted by Wayne Parham [ 70.234.106.162 ] on July 14, 2008 at 20:47:17:

In Reply to: Re: Update, Update!!! Crossover early impressions posted by Bill Epstein on July 14, 2008 at 18:16:47:

Thanks for taking the time to write in such detail.

The value of C3 was changed from 8.2uF to 6.8uF to shift circuit damping ever so slightly. The crossover point wasn't changed. Both woofer and tweeter share the range from about 1.2kHz to 1.6kHz, with some overlap down to 1kHz and up to 2kHz. This provides constructive summing on-axis as well as off-axis in the vertical plane through an arc of about 50°. The edges of that arc are about 20° above the forward axis and 30° below, so tilt the speakers back 5° or 10°. A small 3" angled riser is just about perfect.

• four π loudspeaker performance data

Replies:

• Re: Update, Update!!! Crossover early impressions - Kim Schultz 05:31:54 07/16/08 (2)
  • four π crossover - Wayne Parham 15:22:08 07/16/08 (1)
    • Re: four π crossover :-) - Bill Epstein 23:19:35 07/16/08 (0)
• Re: Update, Update!!! Crossover early impressions - Matts 14:46:12 07/15/08 (2)
  • Re: Update, Update!!! Crossover early impressions - Wayne Parham 23:54:01 07/17/08 (1)
    • Re: Update, Update!!! Crossover early impressions - Matts 01:33:47 07/18/08 (0)