Posted by Paul W [ 82.46.61.85 ] on June 25, 2008 at 20:29:37:

In Reply to: Re: 7 Pi bass cabinet posted by Matts on June 25, 2008 at 16:52:42:

Hi Matts, I use the 4 ohm tap (in preference to the 8) as although this provides a slightly less open sound and reduced output, overall the bass is better controlled and the tendency for the upper frequency shout is reduced. I'd hope the MagneQuest iron did provide a significant upgrade as the output transformer supplied as standard costs under $5! I'm also running the HF compression horn with a small (thin) amount of wadding placed in the throat to further tame the hard edge I'm hearing - hopefully this will tone down a bit over time and I can remove the wadding. But may also be an indication of upper frequency 'room effects'.

Paul

Replies:

• Uniform directivity - Wayne Parham 14:50:52 06/26/08 (4)
  • Re: Uniform directivity - Paul W 15:55:02 06/26/08 (3)
    • B&C DE250 packaging - Wayne Parham 17:24:49 06/26/08 (2)
      • Re: B&C DE250 packaging - Paul W 20:17:24 06/26/08 (1)
        • Re: B&C DE250 packaging - Wayne Parham 20:33:36 06/26/08 (0)