Posted by DavidK [ 82.46.61.85 ] on April 08, 2008 at 16:06:13:

Hi,

Decided to give the 7 Pi a shot and started with the Mid-Horn section. Now due to some poor cutting on my part I've ended up with the mouth of the flare being undersized. I've got 23 and 5/8's by 11 and 3/4's. The other dimension that has ended up under size is the edge of the flare to throat on the side panels 14" instead of 14 and 1/2. Throat size is correct as is the throat to flare distance of the top and bottom panels. So have I wasted a day making some oblong pyramids, or can I go ahead and use these? Any likely problems. I have to say they were a real pain to put together and I don't really want to scrap them and start over if they are usable.

Dave

Replies:

• Re: Mid-horn flare; how critical are the dimensions? - Wayne Parham 18:21:43 04/08/08 (3)
  • Re: Mid-horn flare; how critical are the dimensions? - DavidK 22:42:31 04/08/08 (0)
  • Re: Mid-horn flare; how critical are the dimensions? - Chris R 20:52:09 04/08/08 (1)
    • Re: Mid-horn flare; how critical are the dimensions? - Wayne Parham 00:43:03 04/09/08 (0)