MD2001 - Good down to 1Khz; PSD2002 - Slightly higher

In Reply to: pushin' Eminence 1" to 1.2KHz - how well does it work? posted by freddyi on December 15, 2001 at 12:29:10:

I think you'll be OK with 1.2kHz crossover point, certainly if over 2nd or 3rd order. The MD2001 is good to 1kHz, the PSD2002 a little higher. I cross mine over at 1.6kHz third-order but 1.2kHz is probably OK if the horn loads there and the slope is high enough.

Follow Ups:

Re: MD2001 - Good down to 1Khz; PSD2002 - Altec horns - freddyi 14:42:11 12/15/01 (3)
- Peavey horns - Wayne Parham 15:08:23 12/15/01 (2)
  - Re: Peavey horns - maybe mine are CH-3? - freddyi 15:23:25 12/15/01 (1)
    - Nope. Yours are bigger. - Wayne Parham 15:32:16 12/15/01 (0)
Re: MD2001 - Good down to 1Khz; PSD2002 - Slightly higher - Adam 13:56:32 12/15/01 (4)
- Cool rendered image! - Wayne Parham 14:29:48 12/15/01 (3)
  - Re: Cool rendered image! - Adam 20:28:15 12/15/01 (2)
    - Re: Cool rendered image! - Wayne Parham 21:30:12 12/15/01 (1)
      - Re: Cool rendered image! - Adam 11:13:17 12/16/01 (0)