Re: Pro 4 + seven midhorn and tweeter

[ PiSpeakers Forum ] [ Help ]

Posted by Paul C. [ 64.19.247.3 ] on April 23, 2007 at 20:59:55:

In Reply to: Re: Pro 4 + seven midhorn and tweeter posted by beto1 on April 23, 2007 at 19:50:18:

Ply is lighter and stronger than MDF. With very large and heavy drivers MDF does not hold up well. I just find ply to be the better material. For you, MDF is probably the better choice.

I have a plywood cutting jig I made that works well. Click the attached link. You will have to click on each image icon to view the photos if you are not registered at that site.

I use aliphatic wood glue with bats and screws, screwed from the inside so they don't show. I cover the ply edges with "birch tape". Then sand, stain, and apply several coats of hand rubbed tung oil.




Replies:



[ PiSpeakers Forum ] [ Help ]