Posted by dtkky on April 02, 2001 at 01:08:10

Hello Wayne,
I have been surfing your website and would really like to try building a pair of corner horns for some scanspeak 10" that I have. The T/S parameters are as follows:
Sd 298cm2
Vas 270 litres
Fs 20 Hz
Qts 0.22
Xmax 5.5mm
Re 5.5 ohms
Pmax 130W
Le 0.12mH
Sns 91 dB
Do you think it's feasible to cover 30Hz to 500 Hz?
Your Pi-align software suggested a 2.1 cu.ft. box tuned to 34.5 Hz. (correct me if I'm wrong). This is smaller than what Boxplot suggests as optimal. Is this always so?
Also, can I stack 2 corner horns one on top of the other with a midrange horn in between? (D'appolito style)
I would really appreciate your words of wisdom before I start cutting up my wood.
David Tan

• Your system's response curve Wayne Parham 11:37:39 04/03/01 (2)
  • Re: Your system's response curve dtkky 15:47:12 04/03/01 (1)
    • Re: Your system's response curve Wayne Parham 17:30:32 04/03/01 (0)
• Re: scanspeak 10" Wayne Parham 09:51:08 04/02/01 (0)