Posted by Wayne Parham [ 70.128.102.211 ] on May 01, 2006 at 10:21:58:
In Reply to: Wayne - Crossover values for 2 x 16-ohm motors in Four-Pi Pro posted by ccvogel on April 30, 2006 at 08:18:58:
Use the values of C1, R1 and R2 with the stock (8Ω) crossover. The load on the crossover is formed by the driver and the components C1, R1 and R2, and this is a solution that works well with R1=50Ω, R2=16Ω and C1=33uF. Summing is good and the initial shelf is nice and flat with compensation coming in at the right frequency.
[ PiSpeakers Forum ] [ Help ]