Posted by spkrman57 [ 65.24.237.154 ] on January 12, 2006 at 13:33:38:

In Reply to: TAD TD-4001 Passive Crossover Suggestions Wanted! posted by Mikey on January 12, 2006 at 13:08:20:

Use Wayne's 800hz crossover and use the attenuation that gives the same efficiency for both drivers.

Even though you are using a 2" compression driver 800hz is a better crossover point than 500hz/600hz due to the vocals being projected better and it is safer for the compression driver.

I use GP's 399 driver 1.4" and even though it is rated down to 500hz it projects a sweeter sound at 800hz!

Hope this helps.

Ron

Replies: