Posted by Norbert [ 24.141.224.166 ] on November 21, 2005 at 20:19:33:
In Reply to: Re: Two Tower initial impressions posted by Bill Epstein on November 20, 2005 at 14:04:22:
I started using carpenter's glue... that didn't go well because I only have four clamps and a big piece of plywood to sandwich the veneer and I am certain I needed more... so for the rest of the project I used contact cement.. all of my bubles came after applying latex shallac over contact cement backed veneer. Speaking of veneer, I used the raw variety. Looking back I'll never use raw veneer again (although it was way cheaper compared to paper backed ones) and would need way more clamps... someone told me later that I also needed a roller to apply on the veneer when matting to the clued surface.
Bill, would you have any other suggestions?
[ PiSpeakers Forum ] [ Help ]