Posted by Vinicius [ 200.96.149.34 ] on April 09, 2005 at 16:39:40:
Hi, Wayne Parham and everybody
(Sorry for my English!!)
I'm from Brazil and I saw this post, and I still have a doubt!
I have a bi-amplified system (two-way sytem or called component sytem) and a active crossover before de amplifier.
The first doubt:
I will put a zobel network and I need to know if can I put it between the amplifier and the speaker directly (without passive crossover)?
-----------------------------------------
The second doubt:
Wich formulas above is correct to find the value of the capacitor to build the zobel?
f= Frequency impedance double
pi = 3,14....
Rvc = Re = Resistance of teh coil voice
C = 1 / (2 X pi x f x Rvc)
http://sound.westhost.com/lr-passive.htm#1-impedance
or
C(microfarad)= 1,000,000/(6283 x Nominal impedance x f)
http://www.the12volt.com/caraudio/crosscalc3.asp#zobel
--------------------------------------
The third doubt:
To find the frequency impedance double wich formulas is the correct?
Lvc = Le = Inductance of the voice coil
f = Rvc/ (2 x pi x Lvc)
or
f = 2 x Rvc? This means Frequency impedance double, but the values are different!!
Thank you very much!!
Vinicius
[ PiSpeakers Forum ] [ Help ]