Re: which model of fostex's are you running??

[ PiSpeakers Forum ] [ Help ]

Posted by Henry [ 199.253.174.9 ] on March 29, 2005 at 10:13:40:

In Reply to: which model of fostex's are you running?? posted by oface on March 29, 2005 at 09:01:00:

I have the older 208 sigma. Tried it in a back-loaded horn. Construction was too much for me, so I decided not to try a second BLH cab. Also put it into Martin King's MLTL but the baffle step circuit sucked the life out of the driver. I also put it on an open baffle and used a Behringer DEQ2496 to flatten the response and it was OK, but obviously no bass.

I've been thinking of a variation of the Dick Olsher Basszilla, by using an active crossover I can make a cheap bass-bin and use a small open-baffle with the 208 on top. Problem is cheap bass-bin may not match well for the dynamic and fast full-range driver. Costs and space are a concern otherwise I would get the same driver Olsher uses, an Eminence Magnum 15HO.

But if I spend that much money, I might as well buy a kit that has been well thought out so that I can get good results from the beginning. The 4Pi looks to be best bet, although the large 15-inch woofer has me concerned about how it will sound in small rooms of 12 x 12 or 15 and variations of that common to most houses.




Replies:



[ PiSpeakers Forum ] [ Help ]