Posted by Wayne Parham [ 64.216.176.193 ] on September 02, 2004 at 08:48:59:

In Reply to: redesign enclosures posted by BudiantoHam on September 02, 2004 at 04:56:13:

I'd be happy to help you with these speakers and there are others on this forum that will probably pitch in too. But we'll need some more data. You'll need to know this information in order to do a good job. What you don't know or can't find, we'll have to think of a way to determine using whatever measurement tools you have at your disposal. The better information you have, the better your results will be.

These are the things we need to know:

1. Frequency response and sensitivity of each of the three drivers.
2. Power handling and frequency limits of each driver.
3. Electrical specs of each driver, i.e. resistance and inductance near the crossover frequencies.
4. T/S electromechanical specs of the woofer.
5. Volume of the box. If it has a port or passive radiator, we'll need specs on that too.
6. Position of the drivers in the box.

Replies: