Posted by Haknhendrix [ 161.114.1.184 ] on March 31, 2004 at 08:24:39:
In Reply to: Re: Compensation Network connection posted by Adrian Mack on March 23, 2004 at 21:35:26:
OK - I'm ready to fire up the soldering iron - well almost.
I sharpened my pencil, diagrammed the compensation network based on the 4 Pi schematics Wayne sent me - lots of lines connecting the resistors (series/parallel), and built a 3 dimensional model out of cardboard. I then looked at the URL sent to me with the attached graphic:
http://www.audioroundtable.com/PiSpeakers/messages/13262.html
and modeled this out of cardboard - and they are two different beasts.
So, if I duplicate the compensation network based on the picture provided via the URL - I feel like I should be Good to Go. It will be connected to the Eminence PCB.
The woofer compensation network looks easier - connect the dummy resistor to the capacitor, and connect the leads in parallel prior to connecting to the woofer.
[ PiSpeakers Forum ] [ Help ]