Posted by elektratig [ 205.188.209.7 ] on March 10, 2004 at 15:36:18:
In Reply to: Re: Tower 2Pi ports posted by Wayne Parham on March 09, 2004 at 09:42:07:
Timely question and answer. Before winter set in, I started a pair of new cabinets to converts my 2 Pis into 2 Pi Towers, and then ceased operations when it got too cold in my garage/shop/igloo. Last weekend, I revived the project, cut the front and back baffles, and biscuited the back panels to the boxes. I am going to cut out driver and port holes and attach the internal braces and front baffles this weekend.
All of which leads to the question. I am going to be making the front baffle double thickness, using two panels of roughly 3/4" MDF (haven't measured it, it's 3/4" nominal), so the overall thickness should be about 1 1/2". Is there a program or formula that I can use to determine the proper port diameter, i.e., if 3/4" thick = 4.625"D, then 1 1/2" thick = x"D?
Thanks in advance.
[ PiSpeakers Forum ] [ Help ]