Posted by GarMan [ 216.13.136.38 ] on February 09, 2004 at 08:17:51:

In Reply to: taming the piezoelectric posted by wasteh202 on February 08, 2004 at 22:39:56:

Putting a resistor across the binding post or a cap in series with the tweeter will both tame the piezo, but in different ways. I found that the cap will attenuate the piezo, while the resistor "mellows" it out.

Values you may want to try are:
0.1uF for -6dB
0.3uF for -3dB

Try a 50, 22, or 12 ohm resistor across the binding post for a small, medium and large "mellow" effect.

Gar.

Replies:

• Re: taming the piezoelectric - ports 11:20:42 02/10/04 (1)
  • Re: taming the piezoelectric - GarMan 21:11:57 02/11/04 (0)