Posted by Wayne Parham [ 65.69.120.122 ] on January 15, 2004 at 15:58:13:

In Reply to: Also want to know about 2370A Flare posted by GarMan on January 15, 2004 at 13:24:04:

Used 2426's can sometimes have damaged or second-source diaphragms. You can use 16 ohm versions, although as you've noted, the crossover was designed for 8 ohm devices. We discussed the values here, so you might try a search. I'll rummage around and see if I can find this information too. As for the horn flare, the H290 is much smaller and shouldn't be used below 1kHz. I'd keep 'em above 1.2kHz, which is OK since the PSD2002 really needs to be crossed higher too. The JBL 2370 is a much larger horn and can be used down to 800Hz.

Replies:

• 16 ohm vs 8 ohm drivers - GarMan 16:26:37 01/15/04 (3)
  • Re: 16 ohm vs 8 ohm drivers - Wayne Parham 17:38:10 01/15/04 (2)
    • Re: 16 ohm vs 8 ohm drivers - GarMan 22:25:16 01/15/04 (1)
      • Re: 16 ohm vs 8 ohm drivers - Wayne Parham 22:58:53 01/15/04 (0)