Posted by Wayne Parham on August 08, 2003 at 13:43:45

In Reply to: Re: pi one pro posted by Demetrius on August 08, 2003 at 07:22:31:

Connect the 2405H using a second-order network having a 2.0uF cap in series and 0.5mH coil in shunt followed by an attenuator of 8 ohms in series and 4 ohms directly across the tweeter. For the 2115H, use a 0.5mH coil in series. If you run a 2115J, then use a 1.0mH coil instead.